How to Strap

Newest Combination Tool by Signode BXT3

Newest Combination Tool by Signode BXT3

The Signode BXT3 is the newest combination tool in the market for polyester and polypropylene strapping. It retains most of the excellent features on the Signode BXT2 and adds many new ones. The series comprises of tools that accept straps of different width ranging from 3/8” to 1-1/4”. The battery-powered tool generates adjustable tension and can be used for low to heavy-duty applications in a wide range of industries.

What is New with the BXT3 Series?

The newest combination tool has an upgraded display with an elegant screen. You will always have all the information displayed on the screen so that you know that your poly strapping tool is doing. The BXT3 makes it even easier to adjust the tension from soft mode to standard mode, seal, weld, and instantly switch between manual and automatic modes.

Signode has retained the latest BOSCH battery technology used in the BXT2 series. Overall, the BXT3 is among the easiest tools to use.

Signode BXT2

The Signode BXT2 is BXT3’s predecessor that applies both PET and PP strapping using friction weld joint system. It features automatic weld function for faster strapping. The series comprises of different tools with different specifications of poly strapping and tensioning including:

BXT2 16: 3/8” to 5/8” poly strapping and generates 88 to 335 lbs (soft) and 200 to 500 lbs (standard)
BXT2 19: 5/8” to 3/4” poly strapping and generates 88 to 350 lbs (soft) and 260 to 880 lbs (standard)
BXT2 25/32: 1” to 1-1/4” poly strapping and generates 220 to 1,100 lbs (soft) and 551 to 1,430 lbs (standard)

Other Battery Tools

The grippack 114 tensioner, sealer and cutter from Signode is a battery powered steel strapping tool series. It is the only battery tool that accepts steel straps and is recommended for mid to heavy-duty applications. It is the perfect alternative to heavier pneumatic tools, providing high level of portability. It is a unique battery-run tool in that it can generate a staggering 1,500 lbs of tension and match its pneumatic counterparts in terms of power.

The tool is complemented by the grippack 114 sealer for sealing steel strapping and the grippack cutter to complete the cycle. These tools can accept 3/4” to 1-1/4” steel straps and the tensioner can generate adjustable tension from 800 to 1,500 lbs.

Tool Repair & Accessories

All the different accessories for the Signode BXT3 are readily available for order. you can choose the right accessory for the tool to make the strapping applications even easier and faster.

The tool can also be sent for repair and maintenance with quick turnaround time. The tool repair, parts replacement and maintenance services are offered with the shortest-possible turnaround time thanks to easy availability of parts.

Newest Combination Tool: Signode BXT2

Newest Combination Tool: Signode BXT2

The Signode BXT2 is the newest battery-powered combination tool designed for poly strapping. This series comprises of different tools for poly straps of different width ranging from 1/2 inch to 5/8 inch. The tool pulls up to 560 lbs of tension and provides all the advantages of Signode’s proven battery-run tools. The new combination tool is easier to use and faster, and is designed for increasing productivity. The legacy of The BXT2 is carried forward with the new Signode BXT3.

New Battery Technology

The new Signode BXT2 features the new Hypercharge Technology that charges 80% of the BOSCH battery within 15 minutes. It is designed for delivering high level of reliability, improved consistency, and cost-effective polyester and polypropylene strapping. This is a reliable tool that delivers maximum tension to the last cycle on the charge.

Technical Specifications

Strapping Type: Polypropylene (PP) & polyester (PET) strapping
Strapping Size: 3/8” to 5/8” (BXT2 16), 5/8” to 3/4” (BXT2 19) & 1” to 1-1/4” (BXT2 25/32)
Tension: 88-335 lbs & 200-500 lbs (BXT2 16), 88-350 lbs & 260-880 lbs (BXT2 19), and 220-1,100 lbs & 551-1,430 lbs (BXT2 25/32)
Joint Efficiency: Up to 85%
Seal Type: Friction Weld
Cycles: 200 to 400 cycles per charge
Battery Charge Time: 15 to 30 minutes

The BXT2 features a new brushless motor technology that reduces wear and tear and minimizes maintenance. Thus, you will be using the tool more to increase productivity than fixing it. This combination poly strapping tool can be used in both fully automatic and semi automatic modes.

Ease of Use

The Signode BXT2 is designed for making poly strapping easier than ever. Its operation is as easy as sliding the strapping under the gripper foot and pushing the button. It will seal, weld and cut automatically with the push of a single button. There is no need to deal with multiple manual tools.

Signode BXT3

The Signode BXT3 takes the BXT2’s legacy even further by retaining its features and adding new updates. It especially features an updated display that informs you what the tool is doing. With this new battery-powered poly strapping combination tool, it becomes even easier to adjust tensioning, sealing, and cutting.

Signode Grippack Battery Tools

The grippack 114 tensioner is the world’s only battery-run tensioner designed for steel strapping. It accepts steel straps of width ranging from 3/4” to 1-1/4” and can pull adjustable tension of up to 1,500 lbs.

The grippack 114 sealer is the matching battery powered sealer for the tensioner. It applies double reverse notch seal and weighs just 8 lbs. The grippack cutter completes this battery-run steel strapping tools set from Signode.

Repair & Accessories

All the accessories for the Signode BXT2 are readily available for order. Choosing the right accessory makes the tool even easier to use in stationary applications.

Besides, tool repair and maintenance services are also available for the battery-powered poly strapping tool. It can be repaired and returned within the shortest turnaround time.

Battery-Powered Signode Grippack Cutter for Steel & Plastic Strapping

Battery-Powered Signode Grippack Cutter for Steel & Plastic Strapping

The Signode Grippack Cutter is the only battery-run cutter for steel and plastic strapping in the market. The tool is capable of cutting effortlessly through even two steel straps of thickness 0.044 inch and width 1-1/4 inch. With the capacity to complete up to 240 cycles per charge, it is a powerful and high-performance cutter designed for improving productivity.

The Grip pack Cutter can be used in 2 different modes for different types of applications.

Non-Tensioned Strap Mode: This mode is suited for achieving maximum cutting speed.
Tensioned Strap Mode: This mode helps in improving the safety for the operator.

The steel strapping cutter has serrated jaws for holding one end of the strap after cutting. This helps you achieve single-hand operation. The operator will be able to stay out the way of the rebounding steel strap end.

Technical Specifications

Weight: 7.5 Pounds or 3.4 Kg
Strapping Quality: Steel Strapping or Plastic Strapping
Strapping Dimensions: Maximum width of 1-1/4 inch (32mm) and thickness 0.057 inch (1.45mm)
Capacity: 240 cuts in a single charge

Features of Signode Grippack Cutter

The main features of the Grip pack Cutter are as following:

Light weight tool featuring ergonomic design for reducing hand fatigue
Features unique tensioned-strap and non-tensioned-strap modes for safety and speed needs
Can complete up to 240 reliable cuts on a single charge of the depending Li-ion battery
Capable of cutting up to 2 x 1-1/4 inch steel strapping of thickness 0.044 inch
Enables single-hand operation to keep the operator safe and out of the way of the rebounding steel strap

Complementing Steel Strapping Tools

The Grip pack 114 Tensioner and Sealer are the complementing tools designed to work with this cutter. The main features of these tools are as following:

The Grip pack 114 Tensioner can apply steel straps of width 3/4 inch (19mm) to 1-1/4 inch (32mm) and thickness 0.025 inch (0.64mm) to 0.031 inch (0.80mm). It can pull very high adjustable tension of 800 lbs (3,600N) to 1,500 lbs (6,670N), making it the strongest battery-powered steel strapping tool in the industry. It is a lightweight tool that weighs just 8.5 lbs.
The Grip pack 114 Sealer is also a battery-powered tool for accepting steel straps of same width and thickness. It applies a highly reliable double reverse notch joint and weighs just 8 pounds.

Signode Grip pack Family Repair & Accessories

All the accessories for the GripPack Cutter can be easily ordered along with the purchase. Use these additional fittings to help make it easier to use and speed up your strapping applications.

Besides, tool repair and maintenance services are also available from experienced technicians. Factory-certified and well-trained technicians can help in returning your repaired tool in a quick time.

Tool Banding Repair

We use advanced diagnostic equipment to repair all types of strapping tools, including manual, pneumatic and battery tools. We also stock the largest parts inventory in the US. This is why we are able to repair and return your strapping tool within a week, thus making minimal impact on your operations.

We Fix it Right the First Time

At Allstrap, we fix your battery, pneumatic or hand tools right the first time. We can provide tool rebuild services around your shut down dates. We have a special policy of intimating our clients about the repair costs when it exceeds a certain percentage of the tool’s price. This further contributes to our faster turnaround time. This limit is 35% of the price for a new tool. if the cost of repair is beyond this limit, we will recommend you to replace the tool with a new one.

Repair for All Major Brands

We repair all the major brands of tensioners and sealing tools including the following:

Repair Services for Hand Tools

Allstrap can repair your hand tools in a cost-effective way. Your tools will continue working efficiently after the repair. Each tool is cleansed and tested after repairing. We repair all the major hand tool brands used for plastic or steel strapping.

Battery or Pneumatic Tool Repairs

Our service technicians have vast experience in repairing and rebuilding pneumatic and battery tools from all the major brands. Our technicians are regularly trained on the latest technologies. We can have your strapping tool running again within the shortest turnaround time. We provide high-quality replacement parts for all types of steel and plastic strapping tools. All our technicians are factory certified, thus ensuring that your tools are handled only by proven experts.

Replacement Parts

Allstrap has the largest inventory in the country. All replacement parts and accessories are readily available in stock. This helps us in returning your repaired and rebuilt tool quickly. All repair orders are treated with equal priority. We repair manual, battery, and pneumatic tools.

We provide competitive and high-quality services and parts for all types of tools including tensioning tools and sealers. Our tool repair services are focused on helping reduce the costs, save time, and deliver high-quality services.

Signode Grip Pack 114 Tensioner Battery-Powered Steel Strapping Tool

Signode Grip Pack 114 Tensioner Battery-Powered Steel Strapping Tool

The Signode Grip Pack 114 Tensioner is a powerful battery-powered tool designed for 1-1/4” high-tensile steel strapping. This lightweight yet heavy-duty steel strapper weighs just 8.5 lbs. it can generate adjustable tension of 800lbs-1,500lbs. it features the latest technologies to make mid-to-heavy duty strapping easier and faster. It is the perfect tool for mobile strapping applications.

The Grippack 114 tensioner is both lightweight and ergonomically designed. This helps in reducing operator fatigue and improving productivity. It can complete up to 250 strapping cycles on a single battery charge. The tool can be easily moved around the loading dock or warehouse. There’s no need to worry about heavy pneumatic air lines. It also provides the level of consistency that’s difficult to find in a pneumatic tensioner. This further helps in improving reliability and performance.

Why Grip Pack 114 Tensioner?

Strapping applications for high-tensile 1-1/4” steel strapping are limited mostly to pneumatic tools because of the need for high tension. However, the Grippack 114 tensioner is a game changer in the industry. It is lightweight, portable and yet generates tension equivalent to its pneumatic counterparts. It provides you the advantages of low-weight and portability which are not possible with its pneumatic counterparts.

The Grip Pack 114 tensioner can deliver the perfect combination of power and performance while reducing the costs of air generation. Because it is a battery-powered tensioner, it will require a sealer to complete strapping applications. It is also compatible with the Signode Grippack 114 Sealer and Pneumatic PN2-114, thus giving you more number of options when it comes to choosing a sealer. This makes it a unique tool that can be used with both battery-run and pneumatic sealers.

Technical Specifications

Strapping: steel strapping; 3/4”–1-1/4” width; 0.025”-0.031” thickness.
Weight: 8.5 lbs
Tension: 800lbs-1,500lbs (3,600N-6,670N) adjustable tensioning

Repair & Parts

All the wearing parts and replacement parts for the Grip Pack 114 tensioner are readily available. You can easily place the order online. The tool also has a service-friendly design. Both these factors make tool repair much easier and quicker, thus reducing the turnaround time. Its common wear parts are:

Jaw
Notcher
Lower jaw pin
Upper jaw pins

Besides, all the Seals and Accessories for the Grip Pack 114 are easily available for online order. The accessories are meant to help you get more out of the tool. This can further help in improving the tools performance and boost the productivity.

Fromm P327 Battery Powered Polyester Strapping Tool

Fromm P327 Battery Powered Polyester Strapping Tool

The P327 Fromm Battery powered strapping is a poly strapping tool designed for accepting straps of width 5/8”-3/4”. It weighs just 9 lbs and can pull adjustable tension of up to 790 lbs. This combination tool applies friction weld seals of high efficiency. This battery-run, lightweight tool is easy to use and can complete hundreds of cycles per charge.

Features of Fromm P327

Powered by latest Lithium-Ion battery.
Features an improved and reliable 18V motor.
Ergonomic design with small handle for single-hand operation, thus reducing operator fatigue.
Completes hundreds of strapping cycles per battery charge (varies depending on the polyester strapping size and quality).
Special battery-protection design.
High tension force. Adjustable tension force, speed, and seal time.
Lightweight tool designed for all strapping positions.
Ease of strap threading. Insert both the straps together.
Can be strapped during welding and cooling.
The tool can also weld without tension force.
Service-friendly design makes battery replacement easy and quick.

This battery-powered tool can be recharged quickly, thus not affecting your productivity in shifts.

Technical Specifications

Strapping: Polypropylene & polyester strapping: 5/8”-3/4” width & 0.016”-0.053” thickness.
Tension: 135lbs-790lbs (600N-3,500N)
Tension Speed: 2.2”-5.1” per second
Weight: 9 lbs (4.1 kg)
Seal Efficiency: Up to 75% (varies depending on strap size and quality)
Seal Type: Friction Weld
Battery: Li-Ion 18V DC @ 3Ah

Other Options

There are a few other options and alternatives to this Fromm Battery powered strapping. This includes the following:

The new Fromm P328 designed for polyester strapping of width 1/2”-5/8”.
The new and stronger Fromm P329 for poly straps of width 5/8”-3/4”.
The highly reliable BXT2-16 and BXT2-19 from Signode.
If you are seeking manual tools, the ASC320 tensioner and the mul381 sealer are reliable alternatives.

Repair & Parts

The Fromm P327 has a service and maintenance-friendly design. All its wear parts and battery can be easily accessed and replaced. Thus, tool repair and parts replacement is easy and has quick turnaround. Besides, all its wear parts and replacement parts are readily available online and can be ordered with ease.

Similarly, there are few accessories that can be used to make strapping applications with the P327 easier. This includes the standard suspension bracket and the suspension bracket for alternating positions. These components can also be easily ordered online.

Fromm A483 Pneumatic Pusher-Type Combination Steel Strapping Tool

The Fromm A483 is a pneumatic combination steel strapping tool designed for banding of width 1-1/4 inch. It is a heavy-duty Fromm pneumatic pusher tool that delivers a double-notch upcut joint. It is designed for strapping applications involving continuous operations. It weighs around 43 lbs and can generate a peak tension force of up to 9,000 N.

Applications of A483

The Fromm A483 is perfectly suited for strapping heavy and rugged packages in the steel and non-ferrous metals industries including rods, tubes, and steel coils. It has two versions that generate 7,000N and 9,000N maximum tension. Its special pneumatic feed wheel system makes it extremely easy to insert the 1 1/4” steel banding, thus eliminating the need for operator effort. This is a proven pneumatic combination tool for continuous shift operations where high level of reliability is required.

Technical Specs of A483

The main list specifications of the Fromm A483 are as following:

Strapping Type & Size: 1 1/4” steel banding (0.031 to 0.040”)
Weight: 43 lbs (19.5 kg)
Seal Type: Overlap Seals
Joint Type: Double Notch Upcut
Seal Efficiency: 75%

As already mentioned, this heavy Fromm pneumatic pusher tool requires suspension brackets to be used for stationary applications.

Features of A483

The main features of the Fromm A483 are as following:

Heavy-duty steel strapping tool designed for 1-1/4” steel straps
Capable of pulling up to 9,000 N of tension
Designed for continuous shift operations while delivering high level of reliability.
Considered as one of the most rugged Fromm pneumatic pusher tool designed for heavy-duty applications where reliability is of utmost importance.
Can be used in steel and non-ferrous metals industries.
The unique feedwheel design makes it extremely easy to feed in the strap, eliminating operator effort.
Delivers reliable double notch upcut seal joint.

Using the Fromm A483

The Fromm A483 may be a heavy steel strapping tool, it is designed to make applications easier for the operator. Operators can easily feed the 1 1/4” steel banding through its automatic feedwheel. Working with steel strapping is no longer difficult for heavy-duty applications. You can use this pneumatic-pusher style tool for strapping rods, tubes, and coils in any position. It is the perfect tool meant for using in applications where continuous shift operations are involved. It can be used continuously without having to take a break.

Signode BXT2-16 Battery Powered Combination Plastic Strapping Tool

Signode BXT2-16 Battery Powered Combination Plastic Strapping Tool

The Signode BXT2-16 is a battery-run combination poly strapping tool for straps of width 1/2 inch to 5/8 inch. It is a lightweight, ergonomically designed tool that can be used with a single hand and delivers very high efficiency and productivity.

The BXT2-16 is a proven battery combination tool for speed, ruggedness, and ease of use. The poly strapping tool features the latest BOSCH Li-Ion battery technology that lasts longer and helps increase the tools overall lifecycle. It also has the advanced brushless motor technology that reduces the tool repair and maintenance requirements. The battery-run tool can be used in fully-auto and semi-auto modes.

Technical Specs

Strap Type: Polypropylene (PP) and polyester (PET) strapping
Strap Size: 1/2”-5/8” polyester strapping
Weight: 8.6 lbs
Tension Force: 200-560 lbs and 88-335 lbs (soft mode)

The plastic strapping tool has a unique design that enables quick strapping operations. Just slide the strapping under the gripper foot and push the button. It will tension, seal, weld and cut automatically.

Features

The main features of the BXT2-16 are as following:

Ease of Use – It has an ergonomic design and light weight. The 2-button operation helps in reducing operator fatigue.
Brushless Motor – The latest brushless motor technology helps in minimizing wear and extends lifespan.
Unique Design – The Battery powered tool is designed with flexible settings. It can accept both PP and PET straps, making it perfect for a variety of applications.

Alternative Tools

There are many other battery-operated tools in the BXT2-16 series, designed for different poly strap widths. The combination tools include the following:

The BXT2-10 is a battery-run combination tool designed for 3/8, 7/16 and 1/2 inch poly straps. It weighs just 7.5 lbs.
The BXT2-19 is another tool in the series, designed for 5/8 and 3/4 inch high-strength polyester strapping. It weighs 9.3 lbs.
The BXT2-32 is designed for poly straps of width 1 inch and 1-1/4 inch. It weighs 14.3 lbs and can pull up to 1,430 lbs of tension.
The OR-T 250 accepts poly straps of width 1/2 to 5/8 inch. It weighs 9 lbs and generates 200-560 lbs and 90-330 lbs (soft).

Wear Parts, Accessories & Repair

The BXT2 16 accessories, wear parts and replacement parts are easily available online. Some of the common wear parts include tension wheel, knife, spacer disk, ball bearing and knife.

The Signode tool is designed for minimal maintenance due to the Bosch Li-Ion and brushless motor technology. You can get tool repair services from factory-trained technicians in the shortest turnaround time.

Orgapack OR-T 400 Combination Battery Powered Plastic Strapping Tool

Orgapack OR-T 400 Combination Battery Powered Plastic Strapping Tool

The Orgapack ORT 400 is a powerful combination poly strapping tool designed for plastic straps of width 5/8 to 3/4 inch. The tool is designed for ease of use due to its light weight, balanced construction, and toughness. It is a lightweight combination tool that weighs just 9.3 lbs and generates up to 900lbs. featuring multiple modes, it is a highly versatile poly strapping tool that can be used for simple packing applications and the most heavy-duty strapping applications.

Applications

The OR-T 400 provides total control over the tension and weld time. It can be used for strapping blocks, bricks or even used in line work. With a battery life of 400 cycles, it is a favorite plastic strapping tool in many industries. Its high output makes it the perfect tool for high efficiency and productivity.

Technical Specs

The main technical specifications of the OR-T 400 are as following:

Strap Type: Polyester and polypropylene
Strap Size: 5/8”–3/4” poly strap
Weight: 9.3 lbs
Tension: Up to 900 lbs
Seal Type: Friction weld
Tension Speed: 6.8 inches per second

The ORT 400 is one of the battery tools for polyester strapping. As a combination tool, it helps simplify the operation much better than any other tool. It will do everything – pull, seal and cut in one go in automatic mode.

Besides, the ORT 400 features a service-friendly build. It is extremely easy to replace parts and perform tool repair.

Alternative – If you want to use straps of different width, it is recommended to use other tools from Signode including the following:
BXT2-32 – This battery-run combination tool is designed for accepting poly straps of width 1 inch and 1-1/2 inch.
OR-T 250 – This battery-powered tool is designed for poly straps of width 1/2 inch to 5/8 inch.

Features

The OR-T 400 has the following features that make it stand out:

Single button push system
Latest patented automatic weld system
Brushless motor technology and lithium ion battery for increased lifecycle and minimal maintenance
Completes up to 400 cycles per battery charge

Accessories & Parts

All accessories, wear parts and replacement parts for the ORT 400 can be ordered online. The commonly used parts include:

Tension wheel
Tooth plate
Knife
Battery 18-Volt

Strapping Tool Repair

Strapping Tool Repair Are you looking for high quality repair and maintenance services with more savings? AllStrap provides superior services for all kinds of strapping Tool Repair. We are also one of the leading leaders in all types of strapping materials, strapping tools, and replacements parts for the leading manufacturers in the industry.

Fully Equipped Strapping Tool Repair

We use the latest and most advanced diagnostic equipment for different types of strapping tools. AllStrap has the largest parts inventory in the United States. We can carry out tool rebuilds around your plant shut-down days so that your operations don't get affected.

We provide Tool Repair, maintenance and parts replacement services for the following brands:

We provide a unique Not-to-Exceed-Price model that replaces estimating. This helps in significantly reducing the turnaround on our customer’s repair jobs and boosts efficiency. All the repaired equipment undergo full set of testing to ensure that they meet the proper tensioning and joint strength requirements.

Our Strapping Tool Repair Technicians

We have vastly experienced and specialized technicians who use only genuine manufacturer parts. Our repair technicians are fully trained and certified. All these factors combining the best equipment, technicians and the availability of parts helps us deliver the best-possible and fastest repair services you can find.

We will repair your Strapping tools to the highest industry standards for efficiency:

We fix it right the first time, thus reducing overall Tool Repair costs.
We leave guesswork out of the job. We have the latest tools and most experienced technicians to determine the cause of the problems and fix them.
There will be no unnecessary repairs.
We have a large parts inventory that ensures you will never have to worry about availability of replacement parts.

AllStrap has teams of specialized, well-trained technicians who have several years of experience. We repair tens of thousands of Strapping tools annually. We will replace parts only on finding defects or when they are worn out to a level that will affect the efficiency of the tool. Our technicians undergo continual factory-training to ensure that we remain updated with the latest technology and changes in the industry. We assure you of the highest quality in terms of repairs, replacement parts, and labor.